Ask Experts Questions for FREE Help !
Ask
    manibri3's Avatar
    manibri3 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2008, 08:00 AM
    Janitrol thermostat
    We have a Goodman a/c / heating unit with a Janitrol HPT 18-60, we want to change the thermostat out. What can we use that is compatible with our system?
    Thank you
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jan 21, 2008, 08:07 AM
    If you have a heat pump get one for heat pump. If just heat and air get one for that application. Honneywell is best route to go. Others seem to have too many problems
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol furnace will not ignite from thermostat [ 7 Answers ]

I have a Janitrol furnace, that I believe to about 50 yrs. Old, model # FEC 120-84, type D. When I turn the thermostat on, the pilot light will not ignite the burners. I then go to the furnace and trip a microswitch that appears to be wired to a thermocouple and activated by a rod that goes from...

Replacing Janitrol Thermostat with Honeywell Thermostat [ 1 Answers ]

I am attempting to replace my manual Janitrol Model HPT 18-60 thermostat with a Honeywell Programmable Model CT3500 thermostat. My Heat Pump is a Trane TWR012-042C The 6 wires connected to the Janitrol thermostate are: Y, W2, G, R, O, C How do I connect these six wires to the Honeywell that...

Janitrol to ritetemp thermostat conversion [ 1 Answers ]

I am trying to install a ritetemp 8050C model thermostat to replace the Janitrol thermostat that came with my Goodman-Janitrol two-stage, heat pump system. There is an "E" terminal on the Janitrol unit (seven wires) but no corresponding terminal on the ritetemp unit(six wires). What is the...

Janitrol to Rite Temp thermostat wiring [ 6 Answers ]

I am changing a Janitrol mechanical thermostat to a Rite Temp 8085. And the heat Pump is a Goodman. The wires on my old thermostat are labeled G, Y, E,R,O,W,and C There is no E on the new thermostat. I have hooked the others to the corresponding letters on the new thermostat and left the brown E...

View more questions Search