 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Chances are you disturbed some old crud in the lines when you did the switch. It is usually just the hot that clogs up, did both hot and cold plug up for you? We are going to need to remove the screen or aerator and clean them and maybe the valve. When you come back tell us what your faucets look like and how many knobs.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...
Hello all, I have a slight issue with my gas water heater. It's a AO Smith 32.75 gallon type. All of a sudden, water is coming out of the relief valve pipe. I have placed a coffee can there, and I have to empty it out every few hours now. Im not sure where to turn for this one, as I have...
A new water heater was installed yesterday, but I have no HOT water pressure in either of my showers. Is it the old fixtures, or a leaking pipes?
Hello, We just had a new water heater installed yesterday and the water pressure seems to be reduced (probably 85-90%) of the prior level, through out the entire house. Our old water heater started to leak yesterday AM, had the new one installed that afternoon (40 gallon, 9 year wty, gas: GE...
View more questions Search
|
