Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell RTH230B
[ 4 Answers ]
Is there a way that I can use my thermostat without it being programmed to come on at a specific time. Someone has reset it somehow and now the A/C isn't coming on during the night which in the summer time is unbearable. I just want to be able to set it so that it comes on when I hit the button. ...
Honeywell rth230b
[ 2 Answers ]
I installed the honeywell rth230b thermostat in the house for a furnace. I hooked all the yellow wire green wire and white wire up to each of the corresponding holes for each color I have a red wire and two holes for rc and rh not sure which hole to put the wire and is it supposed to be jumpered...
Honeywell RTH 230 B programming
[ 1 Answers ]
Our thermostat has capability to program for 4 "zones" or times. We have cleared zones 2, 3, & 4 and only wish to use zone 1 for A/C. When reducing the temperature setting in zone 1 below the actual temperature in an effort to get the A/C to kick in, the thermostat will revert to Zone 4 (by...
Honeywell RTH230B
[ 6 Answers ]
I am installing a Honeywell RTH230B thermostat but am not sure of the wiring. I have 6 wires colored as follows, red, green, white, yellow, and 2 blue wires. Please advise? View more questions Search
|