Ask Experts Questions for FREE Help !
Ask
    rebel1's Avatar
    rebel1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 18, 2008, 06:37 PM
    Blowing cold air
    I have a 95 beretta 3100 v6
    With the engine warmed up, it blows out cold air when the temp gage needle moves toward the hot and hot air when the needle turns to the cold.Any ideas?
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Jan 19, 2008, 05:20 AM
    Check the coolant level.
    Check for vacuum leaks.
    Let us know what you find.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My gas furnace is blowing cold air [ 11 Answers ]

:eek: my furnace is blowing cold air. Last night I noticed that my furnace was shuting off when the thermostat read 64 degrees. But we had the therm. Set to 70 degrees. Now today it is only blowing cold air I have tried turning it on and off again to spark some flame? That did nothing. Now the...

Furance blowing cold air [ 1 Answers ]

Why is my furance blowing cold air and running all of the time

Furnace blowing cold air.starts out warm, goes to cold. [ 6 Answers ]

Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....

A/C blowing but not cold [ 2 Answers ]

I recently noticed a loud tapping sound coming from my exterior a/c unit. The a/c was working great but the noise was very loud so I opened the top to remove a piece of plastic that was being hit by the fan. After replacing the top the a/c blows, but is not cold. I didn't do anything but open it...

Not blowing cold! [ 3 Answers ]

We have a 3 year old unit that is not blowing cold air when we switch to cool. The unit outside starts up and everything seems fine. But it does not blow cold air. The second identical unit we have blows very cold air. Please help.;)

View more questions Search