Ask Experts Questions for FREE Help !
Ask
    sean60660's Avatar
    sean60660 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2008, 01:55 PM
    Installing dishwasher in 40" countertop configuration
    I'm remodeling my kitchen and being 6'6" tall don't want the standard height cabinet - would like at last 40". Was reviewing my plans and read dishwasher installation directions that insisted the dishwasher must sit on the floor.

    Why is this? Couldn't a plywood or other base be built for this and matching cabinet veneer below be used?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 17, 2008, 01:59 PM
    Couldn't a plywood or other base be built for this and matching cabinet veneer below be used?
    Don't see why not. You may platform it from the bottom or space it in from the top. Good luck big guy! Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash Dishwasher flashing "clean" light needs to be reset [ 110 Answers ]

We paid a Sears repairman to come out when we had a flashing "Clean" light on our dishwasher, A Kenmore Ultra Wash 665.1603 or 1703, and he gave us the diagnostic code (buttons to push on the operating panel) and we have used it again after that, but I cannot find the order of the buttons to push...

Installing dishwasher in a island [ 2 Answers ]

How do I hook up a drain line for a dishwasher in a island there is no sink in island

Installing granite tiles on countertop [ 1 Answers ]

I have some granite tiles I would like to install on my bathroom countertop, my question is, what type of thinset should I use and what size spacers do I need.

Installing laminate countertop [ 4 Answers ]

I will be purchasing ready laminte for a home store. I do i carefully cut the ends so that the ready made ends can be glue on to lool professional? I can i cut the laminate itself (it already comes glued down to particale boad. Can i use a table saw? Thanks for help!:p

View more questions Search