Ask Experts Questions for FREE Help !
Ask
    talontsi's Avatar
    talontsi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2008, 08:48 AM
    How do I start my furnace?
    Hi I ran out of oil last night and got some this morning but I can't get my furnace to start what do I do? It is a oil furnace.
    MycheleXoXo's Avatar
    MycheleXoXo Posts: 53, Reputation: 2
    Junior Member
    		  
    #2

    Jan 13, 2008, 08:58 AM
    Is this a propane gas furnace?
    If so, is the pilot light lit?
    That's about all I can tell u... I'm no expert-just have had to mess w/our furnace-(propane)

    I'd suggest calling the company you got your fuel from?
    Hope someone can help u!
    XoXo
    Mychele
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Jan 13, 2008, 12:06 PM
    You need to bleed the fuel system. If you do not know how to do that call the company that delivered your oil this morning.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace can not start [ 3 Answers ]

I have a Frigidaire FG6RK072C-12 furnace for about 7 years. It started to have problems a couple days ago. The motor was running and then ignitor was on. But the burner might on for a short period and then cut off or it would start and cut off right away. I got a "pressure switch stuck closed"...

New Gas Goodman furnace won't start! [ 1 Answers ]

I have this problem with a brand new gas furnace, it was installed a few days ago. The heater won't work and the ac blower shuts off immediately when in ac mode. I believe the wiring is OK. The gas won't click and nothing happens when you try to start the heater from the thermostat. I bridged W &...

Furnace will not start - freezing in here [ 3 Answers ]

My gas furnace will not start I checked my fuses - OK The switches are turned to on. I removed my thermostat and jumped the wires - no luck The pilot light is on The furnace has power. What else should I check to get this thing started?

Unable to start furnace [ 2 Answers ]

Hello, I have a two-zone forced air system using an oil furnace. A week or so ago, I lost the ability to start the furnace from the downstairs thermostat, which was a standard round Honeywell electro-mechanical. I could start and stop the fan by setting the control to "On" rather than "Auto",...

Furnace won't start after storm [ 1 Answers ]

We had a storm pass by with eletrical surges. Power was out for 24+ hrs. When I went back to start furnace, blower or furnace would not start when I set the thermostat to auto. Replace 5amp fuse on blower board. Still no action from blower or furnace (gas). Model Heil NTC6075 about 5 year old....

View more questions Search