Ask Experts Questions for FREE Help !
Ask
    goldtix's Avatar
    goldtix Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2008, 06:24 PM
    Shower not hot enough
    All fitures in house get hot enough water except shower. Hotter for few seconds then becomes not hot enough for a good shower. Shower has a single turn on center valve. A full turn on to left is hottest. Both pipes are 3/4 inch and it seems to get more cold than hot water.?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 13, 2008, 06:22 AM
    Is there a skald guard or a posi-temp feature on your shower valve? What's the brand name? Regards Tom
    goldtix's Avatar
    goldtix Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 13, 2008, 07:49 AM
    Believe it is a price fixter from henry plumbing, about eight plus years old. Where would I look for info on valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Build Shower Platform & Install Above Ground P-Trap in Basement Shower [ 1 Answers ]

Hello, I'm new to this site. I tried to find the answer in previous posts and did find some great info, but I still have some questions :) This is what I want to do: Install a corner shower with dimensions 36" in x 36" in the basement, build a platform, & add an above ground p-trap. ...

Removing drain assembly from shower, relacing shower pan [ 1 Answers ]

How do I remove part of the old drain assembly that has been glued to the drain pipe that comes up from the slab floor.

My shower drain is raised above the shower pan by 3/16" causing standing water [ 2 Answers ]

I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...

Replace shower Plumbing Valve assembly shower head 2 knobs [ 3 Answers ]

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...

View more questions Search