Ask Experts Questions for FREE Help !
Ask
    BOYCI's Avatar
    BOYCI Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 8, 2008, 01:58 AM
    Closed couple cistern
    How can I repair a closed couple cistern overflow.The water runs back into the overflow.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 8, 2008, 07:38 AM
    Quote Originally Posted by BOYCI
    How can I repair a closed couple cistern overflow.The water runs back into the overflow.
    What type of ball cock do you have? (See images) Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My closed couple toilet. Is leaking. [ 5 Answers ]

My closed couple toilet has been leaking for sometime,(mop bucket needs emptying every few weeks) my boyfriend tried to patch it over with silicon seal.that didn't work. I think it's the seal inside the tank by the syphon that needs replaced. The thing is I can't get the valve to turn off. Though...

Hot water in wc cistern [ 1 Answers ]

Hi could you tell me why I have really hot water in my toilet cistern,thanks

Cistern not filling [ 4 Answers ]

I have a push button toilet, and the cistern has stopped filling. Water is entering the cistern, though slowly. I filled it with a bucket, and 5 minutes later it was empty, so I think it's not holding the water, it's trickling down into the toilet. Can anyone advise? Thanks!

Plugged up Cistern? [ 1 Answers ]

I have a problem with a precast cistern that was installed in 1979 that seems to be plugged up. I removed all the dirt from the top and located the square opening to gain entry. It was about half full so I decided to be a brave soul and went in. There was about one inch of really fine silt in the...

WC cistern will not fill [ 1 Answers ]

2 years ago we had a new toilet fitted, within those years we've had 1 new cistern installed because the it would not fill and it's happened again. It's a low fitted. As anyone any idea what causes this and how to "fix it" Thanks


View more questions Search