 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating system
Good morning. My friend have a big electric heathing system working on 600 volt 3 phase.
He get mercury thermostat (with two litle botle of mercury) working on 24 volt. He get 3 wire connected on.(one black one red and one white ). My question is ,if I can connect this Thing on a new thermostat an how conncect that wire. Thank you very mutch |
||||
|
||||
|
First you must determine which wire is which, look on the heater where these wires connect, should be a letter designation such as red wire to "R", connect these wires to the same terminal on the thermostat. You will be connecting the "R", "W1", and "W2" for two stage heat. Good luck, Mike
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am having infloor heating circulation problems, My pump is running and the water at the pump is hot but it is not running through the rest of the piping. What would cause the water not to circulate?
I am renting a home that is 50 years old. It has recently turn cool, low 30s. If I turn the heating/air switch to heat and 70 + degrees. All I get is cool air coming out of the air vents. Can someone tell me what things I should do before calling heating specialist?
How do I stop my furnace from building up 15 lbs. of pressure (steam boiler, radiators), and having my pressure releif valve open and filling my cellar with lots of steam.
1. What would cause my copper hotwater pipes to blacken with a sooty powder? We removed a wall during remodeling and found the pipes with a black sooty powder. It comes off on to your hand when touched. Plus, we found a plug with blackened cooper also..? Any help would be appreciated. 2....
View more questions Search
|
