Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell wiring different from old thermostat wiring
[ 2 Answers ]
I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!
Wiring Honeywell TH8321U1006
[ 1 Answers ]
I have purchased a Honeywell TH8321U1006 programmable thermostat to replace my old standard thermostat. My old thermostat (Janitrol) was wired this way: Yellow wire to Y Green wire to G Red wire to R Brown wire to O Blue wire to C White wire to W2
Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems
[ 1 Answers ]
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...
Wiring humidifier and humidistat
[ 1 Answers ]
I have a he360a honeywell humidifier and a h8908b humidistat. If I plug the 120v cord into a outlet can I just run two wires from the humidistat to the humidifier. Would that work properly. The bow that the humidifier came with was open an didn't have all the directions. Could you tell me how to...
Honeywell RTH230B - wiring
[ 2 Answers ]
I'm installing the rth230b on a 3 wire gas fired boiler. The wires are blue, red, white. On the old mercury stat the blue and red wre on the same post. Anybody know how I should wire this one? Thanks! Mike View more questions Search
|