Ask Experts Questions for FREE Help !
Ask
    healthyjoe's Avatar
    healthyjoe Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 5, 2008, 02:46 PM
    Location of flange for toilet
    How far from the wall should the center of hole for the toilet flange be when doing rough plumbing?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 5, 2008, 04:33 PM
    The center of the flange should be 12" off the back wall and 15" off any wall to the side. This would be for a standard toilet but you can buy special toilets with more or less offset.
    healthyjoe's Avatar
    healthyjoe Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 6, 2008, 01:01 PM
    Quote Originally Posted by ballengerb1
    The center of the flange should be 12" off the back wall and 15" off any wall to the side. This would be for a standard toilet but you can buy special toilets with more or less offset.
    Thank you for your help.
    Healthyjoe:)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Move toilet location [ 12 Answers ]

How difficult is it to relocate a toilet less than 10 feet from where it is located now? We would like to install a whirlpool tub, but would need to relocate the toilet.

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

Location of toilet and wall [ 4 Answers ]

Help! New house with roughed in drain lines in basement. After framing, toilet drain is 10.5 inches from bottom plate. I know that textbook should be 12 inches. What are my options? Thanks.

Toilet flange HELP! [ 3 Answers ]

HI, I need some good professional advise. My toilet was leaking and I removed it to find that the toilet flange was broken on one side. The flange and lower pipe appear to be cast iron 4 inch. I must replace some of the damaged flooring but am at a loss as to how to remove the cast iron flange from...

Toilet Vent Location [ 1 Answers ]

How close to the toilet should the vent line be? I’m in the process of moving a toilet and am not sure if I need to extend the vent too. Currently, the vent line is about 6 inches from the toilet, and after I move the toilet it would be 2 feet. Thanks Scott


View more questions Search