Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring a furnace thermostat to manually operate the furnace fan
[ 2 Answers ]
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Could wiring in furnace causing #34 in furnace unit?
[ 3 Answers ]
An orange wire,600v is wrapped together instead of being joined with connectors, could that be the reason the furnace shuts off without maintaining desired temp. Cleaned the flame sensor, put in new thermostat. Unit heats the house, but doesn't maintain heat. #34 flashes,and then the unit shuts...
Wiring a Gas Furnace
[ 1 Answers ]
:confused: I have a Day & Night gas furnace in the house I'm renting. When we went to have the gas turned on, we find out that if won't work because the motor is locked up. My landlord had someone come look at it and he said yeah the motor's locked up and he got us a motor but says he doesn't know...
Wiring my old furnace
[ 1 Answers ]
I have an older rental house with a furnace that is at least 23 years old (the date stamped on the blower motor is 1983). I don't know the make or model... I can find out, but I don't think it will be relevant for my question. Here is my problem. Someone got into the furnace and messed with the...
Furnace A/C wiring
[ 7 Answers ]
I have an old Carrier/Bryant natural gas central heating and A/C system circa 1980. I recently installed a new thermostat and when I traced down the existing wiring I found something interesting: there is no A/C transformer in the furnace, only the furnace transformer. The two wires from the A/C... View more questions Search
|