Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Upgrading to progammable Thermostat
[ 1 Answers ]
I'm having problems upgrading my Thermostat. I replaced a regular thermostat (2 wires), with a NOMA, 7-day Programmable Thermostat from Canadian Tire (52-2544-0) It's a high voltage, 120/240V AC, 60Hz, since it's for baseboard heating. There is 2 main baseboards hooked directly to this unit,...
Upgrading thermostat (Hunter) w/gas furnace
[ 6 Answers ]
Friends, I can find plenty on how to hook up a new thermostat with a heat pump, but not for a gas furnace/electric a/c (Carrier). My old thermostat has: R = Red Y/Y2 = Yellow G = Green C = Black
Upgrading to Programmable Thermostat
[ 2 Answers ]
I'm having problems upgrading my Thermostat. I replaced a regular thermostat (2 wires), with a NOMA, 7-day Programmable Thermostat from Canadian Tire (52-2544-0) It's a high voltage, 120/240V AC, 60Hz, since it's for baseboard heating. There is 2 main baseboards hooked directly to this unit,...
Upgrading to a Hunter Thermostat
[ 1 Answers ]
I'm upgrading from a Janitrol HPT 18-60 thermostat to a Hunter 44110 Thermostat. The wiring for the Janitrol is: Y = Yellow wire G = Green wire R = Red wire O = Orange wire W2 = White wire E = Black wire
Upgrading to programmable ac/heating thermostat
[ 5 Answers ]
I am replacing an old thermostat for ac/heating. There are 5 wires red, white, orange, black, green. My new unit (Noma programmable thermostat). The instructions indicate points of connection using red, white, yellow, green. My confusion is, where do I connect orange and black, because there... View more questions Search
|