Ask Experts Questions for FREE Help !
Ask
    Toni Vaughn's Avatar
    Toni Vaughn Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2007, 08:19 AM
    Ice maker problems
    My ice maker trays do not fill up with water, but I am getting water from the water slot. The arm goes up and down like it is working, but no water fills trays.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Dec 29, 2007, 05:07 PM
    YOu have a dual water valveon this unit. The side that flows to water could be fine and the ice maker side could be bad. Reverse the lead on it and see if you get water to the ice maker and not to the water side. . If this solves the problem, replace the valve. It's not expensive, about $35. If it does not solve the problem, the icemaker is bad and needs replaced. About $125- 150
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Designer needs maker [ 1 Answers ]

I have some design ideas for luggage,handbags, etc. Who do I go to to have these designs made?

Ice maker [ 2 Answers ]

I have a Kenmore refrigerator who's ice maker has stopped making ice. It is only 1 yr old. I have changed the filter and still no ice. Any clues?

Ge side by side ice maker problems [ 0 Answers ]

I have a ge refrigerator. The ice maker would release a small amout of water. I replaced the dual valve. That didn't work. I check for the lines for screens to see if they were clog. I couldn't find any screeens. I then replaced the ice maker. Still isn't working. I'm getting water through the...

Ice Maker [ 2 Answers ]

My icemaker in freezer of ref. quit working. I checked the arm and it seems to be OK. Any ideas on troubleshooting unit appreciated.

View more questions Search