 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tempstar induction fan motor.
My pressure switch keeps turning off the pilot and burners due to low vacuum from the induction motor. It is not strong enuf to keep the microswitch closed and cycles. Is it a bad switch, or low vacuum and what could be causing it. Thanks, John
|
||||
Check out some similar questions!
Hello I have a new Goodman 90% efficiency furnace. The induction motor keeps getting water in it and then the pressure switch trips. The drain is not plugged and is flowing good. Any help would be appreciated. Thanks Dan
I’m doing a induction proof and need to find a way to prove (k(k+1)(k+2))/3 + k + 1 = ((k+1)(k+2)(k+3))/3. thanks
My tempstar furnace burners light and then turn off, light and turn off, they cyle about every 3-5 seconds, when they should burn continuously. What is the problem?
How do we reverse the direction of rotation of a induction motor?along with circuit diagram.
How can be the direction of rotation of an induction motor reversed apart from reversing the connections of condensor(capacitor in table fan) ?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
