Ask Experts Questions for FREE Help !
Ask
    Jlf's Avatar
    Jlf Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 27, 2007, 04:41 PM
    Tempstar furnace
    Hi HVAC... what are the sticky notes and where do I find them, but most important, how do I clean the flame sensor? Thank you very much. John

Check out some similar questions!

Tempstar Furnace [ 2 Answers ]

I have a gas Tempstar furnace , The pilot ignites but the furnace does not it tries a few times then stops. The blower works . What might the problem be?

Tempstar furnace [ 6 Answers ]

I have an 80+ tempstar with the smartvalve gas valve. During the call for heat, the inducer motor starts, but the ignitor will not come on and light. I checked the ignitor and it is good. I checked for voltage and it is good. Could the gas valve be bad, since the ignitor is controlled by the valve...

Tempstar furnace [ 1 Answers ]

My tempstar furnace burners light and then turn off, light and turn off, they cyle about every 3-5 seconds, when they should burn continuously. What is the problem?

Tempstar furnace 1500BFA2 [ 1 Answers ]

How do I re-wire the blower so it will blow steady?

Tempstar furnace 5100BFA2 [ 2 Answers ]

How do I turn the blower motor on permanently?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.