Ask Experts Questions for FREE Help !
Ask
    jefflowes's Avatar
    jefflowes Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 25, 2007, 08:42 PM
    Furnace not coming on
    Furnace will ignite +++ flame on for 5 to 10 seconds then somewhat a loud noise trying to switch on ++++ then flame shuts off ++++ 4 to 6 second delay then flame reignites +++ on for approx.5 sec. fans already on ++++ gas is on +++ flame does kick on every time+++

    Appears to me the turn unit on switch not working??
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 25, 2007, 10:58 PM
    What brand of furnace?
    What model number of furnace?
    Have you done anything lately to the furnace like new thermostat?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cold air is coming out of furnace [ 9 Answers ]

Hi all, hopefully someone can answer my question. I own a furnace that has a secondary boiler (split system), 1 side boiler + gas/water pipes, and 1 side has the forced air blower and air pipes that run across the house. ISSUE #1 Pipes are hammering, can it be stopped or be reduced? ...

Furnace fan not coming on when on AC [ 6 Answers ]

My condenser fan comes on and the ac line get cool with condensation forming but the fan does not come on either when in Auto Or ON position but if I turn the heat on everything works fine. Any suggestions? I am a Auto Tech so any pointing in the right direction I should be able to pick up and...

Rheem furnace not coming on [ 3 Answers ]

I have a Rheem Criterion II Plus 2 Two-Stage 80-Percent furnace purchased August 2005. The problem is that the thermostat clicks to come on and displays heat on, but the furnace does not do anything. I have tried turning up the heat many degrees past the inside temperature but still the furnace...


View more questions Search