Ask Experts Questions for FREE Help !
Ask
    teabouy's Avatar
    teabouy Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 20, 2007, 04:56 AM
    Wiring ceiling lights
    Hello, in my original ceiling light I have three blacks together,yhree reds together and a red with a black with a red sleeve on it.on my new flush fitting light ,I only have a block with three terminals.HELP
    Cobraguy's Avatar
    Cobraguy Posts: 140, Reputation: 11
    Junior Member
     
    #2

    Dec 20, 2007, 06:30 AM
    How many locations do you have that can switch the light?
    teabouy's Avatar
    teabouy Posts: 3, Reputation: 1
    New Member
     
    #3

    Dec 20, 2007, 09:56 AM
    Just one location
    teabouy's Avatar
    teabouy Posts: 3, Reputation: 1
    New Member
     
    #4

    Dec 20, 2007, 02:10 PM
    In my lounge I have 2 ceiling lights,I'm replacing with flush fitting lights.one was straight forward 2 connect,but the other is confusing.
    I have 3 blacks together,3 reds together,a black with a red sleeve and a red together,
    I'm struggling because new light only has a block connector for 3 connections.
    Please help

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring 3 switches for 3 lights [ 8 Answers ]

Hi,need a digram on wiring 3 switches in a gang box to 3 diff lights,I took power from a receptacle,I got one light to work,but need to know how to wire the other 2 lights and switches,also I am using 3 dimmer switches,the lighting is for a lionel train platform.thanks for your help,rich

Wiring lights to fan [ 1 Answers ]

I have Hunter fans, I am installing light. The fans are wired to a variable speed select switch. I connected white (marked light) and black with white tracer (marked light) The fan and light switch seem to be connected in parallel. The fan and light switch work alternating switching the fan off...

Wiring for vanity lights [ 1 Answers ]

My instructions for installing my vanity lights state I must attach the black fixture wire with the black box wire and the white with the white. My wall box has a red wire and a tan (neutral?) wire but no black or white wire. What should I do? Also, there seems to be no green screw to attach the...

Wiring driving lights [ 1 Answers ]

I have been trying to hook up driving lights to an 1999 Honda Accord EX. Previously when doing this I have controlled the driving light relay by a line running from the highbeam headlight to the relay and then to ground. Now when I do this the driving lights remain on continuously. ...

Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling [ 3 Answers ]

I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...


View more questions Search