Ask Experts Questions for FREE Help !
Ask
    bandito's Avatar
    bandito Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 18, 2007, 04:28 PM
    Clicking on Fan one direction but not the other
    Hampton Bay Berlini with a remote. Clicks when in Summer direction but not in Winter Direction. Installed in August but haven't used it. I think we tested it in both directions but I don't really remember. I just started using it and discovered the problem.

    I called customer service and they told me it could be the blades with a screw loose. This is before I discovered it only clicks when going in one direction.

    It also clicks when you turn it on but maybe this is normal??

    Called again and they told me they didn't know what was causing it and I would have to call Hampton Bay ( not the number in the instruction manual) and get it replaced.

    I can't install a ceiling fan. So has anyone got Home Depot to replace the fan WITH installation. They didn't install this one.

    I am hoping there is some other fix for this.

    I manually rotated the blades and it made no sound.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Dec 18, 2007, 07:46 PM
    Check to be sure all screws are tight. Check the path of all spinning parts to make sure they're not contacting anything.

    If you can't install a fan, chances are you also won't be able to locate an fix the clicking sound.

    Does the fan shake at all? Is there a pullchain or anything knocking against glass? It might just need to be balanced.

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More

    Ceiling fan blade balancing issues - Ceiling Fans N More
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Dec 19, 2007, 06:45 AM
    Especially the ceiling huggers, have seen wire hang down and touch motor assembly to create a clicking. Verify wires not touching motor as it spins.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L110 Clicking sound on start - new solenoid, still clicking! [ 1 Answers ]

Hi all, I cut my lawn, engine was running for about 2 hours. Stopped at neighbors house, cold beer, go to restart, just a clicking sound. Thought battery was dead, did a quick check, good voltage, hooked it up to a charger, good amps. Still clicking. I figure it's the solenoid, picked one up...

Acceleration and direction [ 1 Answers ]

A person stands on a bathroom scale in a motionless elevator. When the elevator begins to move, the scale briefly reads only 0.61 of the person's regular weight. Calculate the acceleration of the elevator, and find the direction of acceleration. _______ m/s2 Also which is the direction? Not...

The right direction... [ 4 Answers ]

I just wanted to thank all of you for your help and support through my vunerability. I kept my doors open and I am finally starting to cross through to the other side. Pete and I seem to be getting even closer. I had not seen him for a couple of days last week and we went out with friends on...


View more questions Search