Ask Experts Questions for FREE Help !
Ask
    cory2605's Avatar
    cory2605 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 17, 2007, 08:25 PM
    Need replacement motor for Bryant FK4C A.C.
    Hi All,

    Pardon any ignorance that may come through in my question, but I'm trying to assist my husband in finding a motor to replace the one that broke in our Bryant A.C. Unit. The Model No. is 29-FKYCNBOD6-86BTW. It is a 3/4 H.P.; RPM 0-1400; 1065. Is that enough info to get started? Obviously we are hoping to fix this for as little as possible as theUnit is 8 - 10 years old.

    Thanks,

    Trish:)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 18, 2007, 08:49 AM
    It is best to go to Grainger or a heating supply house for this motor as I do notn think you will find one on Ebay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser fan motor replacement [ 3 Answers ]

I have a Rheem heat pump and have purchased a replacement condenser fan motor. It had an Emerson KA55HXPAM-7255 and was crossed over to an A O Smith ORM 1008. My problem is the wiring, the new motor has one more wire than the old one. I had orange, brown, black on the old one. The new one has...

Carrier Furnace Motor Replacement? [ 2 Answers ]

I have a carrier gas furnace model 58pav090. Recently the motor seized (shaft bearings were in poor shape/scored). The original motor has 5 leads (wires). Y,R,Black, Blue, and White. The AO furnace motor I ordered as a replacement only has 4 leads (Black, Red, Yellow, and Blue). I...

Replacement Furnace Blower Motor [ 4 Answers ]

Hi, I have an older (~40 years, the original with the house) Coleman furnace. The blower motor (General Electric, 1/6 hp, 110 V, 60 Hz, 3.6 amps, PH 1, 1725 rpm) burnt out the other morning. I went to the local shop (RONA) to find a replacement and they didn't have the exact motor. Instead,...

Bryant Blower Motor [ 3 Answers ]

I have a Bryant furnace that is 13 yrs. Old. I would like to take the blower motor out and replace it with a new model. Is there a correct way to remove the blower without tearing the whole furnace apart?

Furnace Blower Motor replacement [ 3 Answers ]

I have a Comfortmaker furnace with General 90 controller. My blower motor stopped working and when I try to turn it on it gets hot, smells like something burning and no air. Capicator was tested and it is OK. Motor is driving excessive current and just heats up. HVAC technician quoted $700 to...

View more questions Search