Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Duraglass pump wiring issue
[ 6 Answers ]
I have a duraglass pump that is used and was wired direct. I bought it third party so I didn't cut the wiring. It has 3 wires: red blue and black, what is the most likely set up for these wires? Red-hot, black-ground, and blue-hot? I am wiring to red, black, and white. Thanks, Ty 230...
3 and 4 way switch wiring issue
[ 1 Answers ]
I purchased a Leviton PR 180 motion activated light control, but was wondering if this could be wired to replace the current 4 way throw switch in its current location. The current 4 way switch is in a 3-switch configuration, but was placed in a location where a motion sensor would work better. ...
Simple HVAC wiring issue
[ 10 Answers ]
I am switching from Honeywell CT87a (subbase Q539A4034) to Honeywell RTH7400 seems simple enough but I am bad when it comes to this sort of stuff. Anyway. I have Red, White, Green, Blue wiring coming out of the wall and have a electric air/heat system. Currently wired to 7400 as R-R W-Y B-W...
Thermostat wiring issue
[ 2 Answers ]
I have installed a new condensing unit and cannot get it to turn on or the furnace to operate in the heat mode. What voltage reading should I expect at the thermostat? I do not seem to be reading 24 volts and am not sure if it is the transformer as I did not touch it. I am wondering if the...
Wiring issue with a Hunter Ceiling fan
[ 2 Answers ]
Thanks in advance for anyone who can help me. I just moved into a brand new home and the Master Bedroom is pre-wired for a ceiling fan. It has two wall switches, one to control the light and one for the fan. The Hunter fan has a black, a white, a black/white and two green wires. The prewire... View more questions Search
|