Ask Experts Questions for FREE Help !
Ask
    Joeflorida22's Avatar
    Joeflorida22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2007, 03:15 PM
    Kenmore washer does not spin out or pump out water all the time
    My Kenmore top loading washer model #110.20712990 sometimes does not pump out the water or spin after it does pump it out. I held down the button and it started to spin when I spun the basket by hand. It also is making a squeeking noise now as well as I noticed a "hot" smell just today. Any suggestions?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Dec 7, 2007, 03:51 PM
    Sounds like the drive coupling may have broke, plastic piece between motor and drum. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Admiral - washer will not spin, pump out or agitate. [ 4 Answers ]

I have an Admiral 2 speed washing machine that I purchased 10 years ago from Montgomery Wards, which is out of business now. The washer will not spin, pump out or agitate. When I turn the know to spin I hear a low buzzing as it try’s to spin, then a click like an overload breaker popped. After...

Kenmore Washer sometimes won't spin and drain water [ 2 Answers ]

Kenmore washer model 110.29812890 washes fine and sometimes it spins and drains the water out and sometimes it does not. Would this be the lid switch and if so, can I replace it myself without it being a major pain? I would appreciate any help and guidance if you think it is the lid switch so I...

Kenmore washer still has water after spin cycle [ 1 Answers ]

I have a Kenmore washer 80 series model 110, After the spin cycle finishes there is still some water in the washing machine. We restart the cycle and then all the water is gone. This doesn't always happen, sometimes it works fine. Any ideas would be appreciated

Kenmore Washer won't spin [ 1 Answers ]

I have searched everywhere but haven't been able to find an answer to this one. My washer is only about 3 yrs old. It runs through the cycles just fine but when it tries to click over to the spin cyle you can hear the motor running but it does not spin. I lift the lid and I and about 1 second...

View more questions Search