Ask Experts Questions for FREE Help !
Ask
    RONMORENCY's Avatar
    RONMORENCY Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 6, 2007, 03:39 PM
    Baseboard heaters-convection or liquid filled?
    Hello, In my breezeway between the house and garage I have a finished room 15x20. In it is an old (at least 25 years) electric baseboard for heat. When I use it I can almost see the faces of the guys at the electric company smile as the bill goes way up as it sucks down the kilowatts. I am looking at replacing it with a newer baseboard heater and programmable thermostat but I am stuck on whether to use a convection or liquid filled model? My house is baseboard with water but it would cost a lot more to include the breezeway onto the houses current system so I need a stand alone system to heat the breezeway. The liquid filled people claim energy savings and a more constant heat. The liquid filled baseboard heaters are $140 compared to $45 for a regular convection type. Any ideas or comments would be useful as I don't want to spend the extra $100 if it isn't worth it. I live in New England. A lot of the time I leave the kitchen door from the house open to the breezeway so the heat leaves the house and somewhat heats the room. The breezeway is well insulated with new insulated windows and doors. When I use the room and close the kitchen door (used as a TV room), that is when it gets chilly in there. Thank you.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 7, 2007, 12:03 AM
    Watts are watts no matter what kind of electric heat you use. Electric heat is also 100% efficient so pick your poison because the operating costs will be the same.

    Note: The only advantage of a liquid filled heater is that the heat will disperse at a different rate because the liquid needs to be heated first. Other than that no difference. Save the 100.00 to help pay the utility bill.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New to baseboard heaters [ 24 Answers ]

Hello; I need a lot of electrical help/advice. I am trying to install an electrical baseboard heater in a basement room (15'X10'). My friend helped me already do the following: Run the conduit and electrical box for thermostat Pull all the wires Mounted the baseboard heater to the wall We...

Baseboard heaters [ 2 Answers ]

I have baseboard heaters (240) I have two hots coming in to the thermostat one black one white marked as hot I have the black wire feed and the thermostat top wire ran to the black wire of the heater I have the white wire from feed to bottom wire of thermostat and the to the white wire of the...

Baseboard heaters [ 11 Answers ]

I am getting ready to put in 4 baseboard heaters 3 of them will be in one room upstairs and the other downstairs. I need help wiring them all. Let me clarify, the 3 baseboard heaters need to be wired together on one breaker and the other will be on its own breaker. Help.

Electric baseboard heaters -wiring 1 thermostat to two heaters [ 2 Answers ]

I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...

Baseboard heaters [ 12 Answers ]

Hi all.. New to the forum.. Thanks in advance for any help.. I am trying to set up new baseboard heating in my basement.. My questions are to what size breakers to use and if I can put it all on one circuit.. I want to set up 3 rooms: Room 1 - 2 1000 watt heaters Room 2 & 3 - 1 1500 watt...


View more questions Search