Ask Experts Questions for FREE Help !
Ask
    chuckcheeseman's Avatar
    chuckcheeseman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2007, 02:38 PM
    Replacing White Rogers Zone Valve Power Head
    I recently replaced the power head on a WR zone valve. The valve is working properly but since the change the heat, although hot, lacks any force coming from the base boards. I lost a small amount of water from the boiler when I replaced the valve and am wondering if I lost too much. If so how do I go about refilling the boiler.
    Thanks. Chuck
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 6, 2007, 09:08 AM
    There is usually a fill valve on the feed water line going to the boiler. There could also be a automatic fill there also. You will need to bleed the base boards also.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White-Rogers gas valve [ 7 Answers ]

Hi all, I'm new here, so bear with me, please! I have a Weil-McLain boiler (M#-CG-8-SPDN, 245,000 BTU) that I use to heat my home. I attempted to start it last week, but the pilot light was out. I tried to re-light it, to no avail. I removed and 'shined up' the thermocouple, but that did no...

How to jump a manual White-rogers thermostat [ 2 Answers ]

Need to jump the thermostat to see if it is bad as the a/c unit does nothing -no-fan-no compressor-no hum

White rogers thermostat issue [ 4 Answers ]

I have a White rogers thermostat model 1F58W-77 and the wires I have that are hooked up right now are: RED-R GREEN-G YELLOW-Y WHITE-W1 BLACK-X1 ORANGE-O What I am trying to do is replace it with a honeywell T8400c. The manual says only 5 wire but this one I guess is the old one that has...

White rogers thermostat 2 stage heat 1 stage cool [ 6 Answers ]

Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:

View more questions Search