Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading
No pressure on cold side shower.
[ 4 Answers ]
The cold side of my shower faucet has developed VERY low water pressure, but not the hot side. The sink faucet in that same bathroom is fine on both sides. All other faucets in the house are fine on both sides. I have a water tank and I have duel knobs. I believe my shower head is Ondine and I...
Low Pressure on the Hot Water Side
[ 3 Answers ]
A few days ago we noticed a significant drop in the water pressure on the hot waterside. It seems to be all over the house. We called a plumber to take a look. He said there is no leak and the only thing he can figure is one of the balls inside the hot water heater we installed less than 2 years...
Low Pressure Hot Water Side Only
[ 5 Answers ]
I just recently had to do some repair on my bathroom sink because I accidentally drilled into a water line in my concrete wall (no dry wall at all). Well, I made the fix on the pipe after opening up the wall. When all is said and done I hooked up the flex lines to the faucet and nothing comes out...
Low water pressure on cold side of shower faucet
[ 3 Answers ]
What should I do (look for) to find out why the cold side of my shower faucet has developed VERY low water pressure, but not the hot side. The sink faucet in that same bathroom is fine on both sides. All other faucets in the house are fine on both sides. I don't have a hot water tank... View more questions Search
|