 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ringing Noise? Heard of buzzing noise from the light bulbs. Buzzing can be caused by the dimmer's pulsesation. This can be corrected by using a better quality filament bulb. If the bulb is replaced, and you still get the buzz, then try a new dimmer.
I've never heard of dimmer ringing when switched? Interesting! Sounds defective. Question: Do you have any fluorescent lights on this dimmer, or on the same circuit? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I work in a new commercial building and the overhead can lights and ceiling fans are controlled by dimmer switches. The metal switch plates get hot enough to be uncomfortable to touch. When I taped them off to prevent use until the contractor could look at them the glue on the back of the tape...
I have a set of lights controlled by two (3-way) toggle switches. I want to be able to dim these lights. Can I just buy two 3-way dimmers? Will they be able to be dimmed from either switch?
I am asking if dimmer switches really use less or save on electricity or not? I ask, because an electrician who does electrical work for a friend of mine told him that they don't save on electricity. I have toggle style dimmer switches for most of the ceiling lights in my home. So, does anyone...
I have two dimmer switches with built in night lights on the toggle portion of switch. I noticed that both night lights started to flicker, otherwise the switch and lights work normal. Will the night light just go out eventually or do I need to replace them due to any possible dangers. ...
Hi I got new diva dimmer switches installed today by a licensed electrician. Does anybody know if when they are in the off position I am supposed to see a light behind the actual switch? I was just wondering if they were installed correctly. Please help. Amy
View more questions Search
|
