Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring for replaced comp[ressor motor
[ 1 Answers ]
I am replacing the compressor fan motor on my YORK unit. The motor I took out had 4 wires Purple and Brown to the small capacitor, green for ground, and black to a connector. The replacment motor has 5 wires, the 5th one is white and I don't know where it connects to. Safe to say the motor...
Replaced a water pump
[ 3 Answers ]
I just replaced my water pump. When I turn on all the faucets in my house the kitchen faucet just drips, both bathroom showers run okay, the sinks in each bathroom run but very low. All the faucets run clear for a few min. then have brown stuff coming out. What could be wrong now? Please help...
Bath tub shower spout & head running water running at same time
[ 1 Answers ]
I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water...
95 civic main relay replaced; ran initially now not running again
[ 5 Answers ]
Hello, I have a 95 Civic, engine turns but won’t start. Initially CEL remained on and fuel pump was not heard. Car sat and a few days later started, fuel pump was heard, and CEL did not stay on. Next day the car did not start as before and decision was made to replace the main relay. Car...
No water pressure after pipe replaced
[ 1 Answers ]
Hi--we had a leak in a hot water pipe in our basement--after the pipe was replaced we have lost our hot water pressure. The pipe is more narrow than the pipe that was originally there, could that be the problem? View more questions Search
|