Ask Experts Questions for FREE Help !
Ask
    pdxhelp's Avatar
    pdxhelp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2006, 11:54 AM
    Hampton Bay Track Lighting Problem
    I just install 3 8' sections of track lighting.
    The first section works fine. The 2nd and 3rd sections do not.
    They are connected by the 90' connectors and look to be fine but the lights do no work. Tried the lights that Do work on the first section also so I know it isn't the lights. Does it need some terminator on the last piece or?

    Thanks
    caibuadday's Avatar
    caibuadday Posts: 460, Reputation: 10
    Full Member
    		  
    #2

    Jan 17, 2006, 06:05 PM
    Quote Originally Posted by pdxhelp
    I just install 3 8' sections of track lighting.
    The first section works fine. The 2nd and 3rd sections do not.
    They are connected by the 90' connectors and look to be fine but the lights do no work. Tried the lights that Do work on the first section also so I know it isn't the lights. Does it need some terminator on the last piece or ??

    thanks
    check and make sure the connectors between 1 and2 and 2 and 3 are lined up... makesure the connectors are in contact with the track's wire((( copper strip))...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Track Lighting head [ 3 Answers ]

How do I go about purchasing a new nickel-finished Hampton Bay Track lighting head. I think the model number is RKI 610543. Not available at Home Depot in other than black & white finishes.

Track lighting prob. [ 1 Answers ]

I have installed a new hampton bay track and also hooked up three new hampton bay hanging track lights. After the install, turned the dimmer on and all of the way up and only the light on the end of the track lights up. The other two filaments are glowing slightly. If I take off one of the...

Hampton Bay Track Lighting [ 1 Answers ]

I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...

Hampton bay track lighting [ 1 Answers ]

We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.

Hampton Bay Track Lighting [ 1 Answers ]

I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working.

View more questions Search