Ask Experts Questions for FREE Help !
Ask
    algy's Avatar
    algy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2007, 07:24 PM
    Themostate connection
    I have a manual thermostat with two wires and I would like to connect a programmable thermostat which has four connections. I do not have AC. So how do I hook up a four connection programmable thermostat to a two wire connection.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Nov 29, 2007, 07:54 PM
    As long as the thermostat doesn't require a common to power itself, just connect one wire to R or RH, and the other to W. RC and Y are for A/C, and G if for fan on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Internet connection problems [ 2 Answers ]

Okay here is my problem, I have a single PC connected to the internet by a cable/dsl modem* motorola SB 5100 surfboard* my internet supplier is blueyonder broadband. I have used this setup for two years now on the same PC without any problems but recently my internet connection seems slower my...

The connection of the server was rset [ 4 Answers ]

Can someone please help me when I try to donwload something it says that the connection of the server was reset please someone help me!!

P-trap to drain pipe connection leaking. [ 2 Answers ]

Hi, I was redoing all the drain piping under my sink during a remodle. It appears everything is sealed nice and tight except for the connection to my drain pipe. It's a plastic drain pipe coming our horizontally from the wall with a threaded end. I purchased a new P-trap and put it in. ...

Wire connection from lennox 21J7101 to a hunter 44760 [ 1 Answers ]

What to do with the T (purple) wire on the lennox when switching to the hunter? Lennox 21J7101 3AAT89B38D

View more questions Search