Ask Experts Questions for FREE Help !
Ask
    sandwood's Avatar
    sandwood Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2007, 12:17 PM
    Wireing a GE reversiable 110V motor
    Hi, I have GE 110volt reversiable motor model# 5KC38M12Z, 1725 RPM , look to be 1/2 hp?

    It has 3 Studs 1 is common 2&3 are forward and reverse, there are two wires that com up from inside of motor(Start windings Maybe) not hooked to any thing.
    I need to know where they hookup to.

    The wiring plate is so faded you can't read it.

    Any info would be appricated
    Thanks sandwood
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 1, 2007, 07:43 AM
    Here is a collection of wiring diagrams, look at the single phase for your connections:
    http://catalog.wegelectric.com/img/Wiring_Diagrams.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Two 110v. To one 220v. [ 1 Answers ]

I need to change two 110 v. circuits coming into a garage to 220 v. to run an air compressor..

110v vs 220v [ 2 Answers ]

Hi. I have a cell phone that requires for 220v that I bought from the philippines. Is it okay if I plug the charger to a 110v here in the u.s? Would it damage the cell if charger is plug to110v? Thanks for your help. Marcia

What is better to use 110V or 220V? [ 2 Answers ]

What is better to use 110V or 220V?

220v to 110v [ 2 Answers ]

How do I wire a 220v circuit to accept a 110v plug and play spa?

Is 220V better than 110V? [ 5 Answers ]

My pool pump is running at 110V. I noticed that I can change the wiring position and run it at 220V. Someone at work mentioned that 220V is more efficient. Would I see a savings on the electric bill? Is this true? The wires now are 12 gauge. Could I just change the breaker and the...

View more questions Search