Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace fan/blower does not turn on automatically
[ 6 Answers ]
I have a furnace, which worked well until today. The furnace fan/blower can be turn on manually (switching to ON position from the thermostat--Maple Chase 9600). However, when the fan switch is switched to AUTO position, and the room temperature is below the setting temperature, the furnace is...
Old AC Delco gas furnace blower won't shut off automatically
[ 2 Answers ]
I am trying to troubleshoot my 43 year old (yes, really) AC Delco natural gas furnace. It is a huge furnace in a closet in my hall bathroom. I had the thermocouple replaced last December. The new problem is that now, when the temperature reading reaches the set point of the thermostat, the gas...
Furnace will not shut off
[ 1 Answers ]
I have an electric Coleman furnace which comes on when it should, but will not turn off When the set temp is reached. Even manually using the on/off switch will not stop it. The only way is to flip the circuit breaker. What is going on ? Thank you.:confused:
Furnace will not shut off
[ 1 Answers ]
I have a 20+ year old Coleman furnace with AC. The White Rogers thermostat has four wires connected, RC, W, G, Y. There in no jumber from RC to RH. There is a blue wire embeded in the wall but is not connected on either end. The AC worked great in hot weather. The problem now is that when the...
How can I make Furnace fan automatically turn off when heater turns off?
[ 2 Answers ]
I have a Thermo Pride OH5-85. There are two manual switches installed next to the unit. One turns on the heater one the fan. I'm unable to find out how to have the heater and fan respond to my thermostat. :confused: Currently if the manual fan switch is on and the manual heater switch is on... View more questions Search
|