Ask Experts Questions for FREE Help !
Ask
    T J luzzi's Avatar
    T J luzzi Posts: 8, Reputation: 1
    New Member
     
    #1

    Nov 21, 2007, 03:09 PM
    Hot water tank clicks
    My hot water tank clicks after I use the cold water or flush the tolet, what is causing this?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Nov 21, 2007, 05:42 PM
    If it is a "Instant Heat" type water heater, that is the contactor(relay) making high current connections. Since this is on your Cold side, could be at threashold or coincidence.
    I have seen houses where the plumber acidently put hot water to the Toilet?
    Do you have a Tank heater?
    T J luzzi's Avatar
    T J luzzi Posts: 8, Reputation: 1
    New Member
     
    #3

    Nov 22, 2007, 09:18 AM
    It is a standard 50 gal electric hot water heater.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Nov 23, 2007, 06:56 AM
    Quote Originally Posted by T J luzzi
    My hot water tank clicks after I use the cold water or flush the tolet, what is causing this?
    Tell us more about this "click". One click? A bunch of little clicks? Loud or soft clicks? Do the clicks come from inside the heater or from a nipple on top?
    Give us all the details you have. Regards, Tom
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #5

    Nov 23, 2007, 09:07 AM
    There is clicking sometimes as things are heated or cooled, Metals expanding and contracting?
    T J luzzi's Avatar
    T J luzzi Posts: 8, Reputation: 1
    New Member
     
    #6

    Nov 25, 2007, 06:45 PM
    Comment on Stratmando's post
    It did not answer the question, but told us of the expansion & contraction of items
    T J luzzi's Avatar
    T J luzzi Posts: 8, Reputation: 1
    New Member
     
    #7

    Nov 25, 2007, 06:50 PM
    I am trying to find the locations of sensors, I am aware of the sounds that hot and cold can make. Re-read the question please
    T J luzzi's Avatar
    T J luzzi Posts: 8, Reputation: 1
    New Member
     
    #8

    Nov 25, 2007, 06:52 PM
    Comment on speedball1's post
    From the top nipple, that's where the clicking noise sounds like it is coming from.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #9

    Nov 26, 2007, 08:26 AM
    This sounds like a heat trap nipple. If it bothers you simply get a 3/4" brass nipple and change it out. Good luck, tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low water pressure from hot water tank [ 8 Answers ]

I drained my water supply when fitting new bathroom suite I have turn the mains water back on but I am not getting any pressure from the hot water taps the cold is fine

Can one shut off water main valve but leave gas hot water tank on? [ 4 Answers ]

I would like to know if I go away for two days and shut my main water shutoff valve can I leave my gas hot water tank on. I saw two answers To a similar question and one answer said you can leave it on and the other Said you had to shut it off. I am confused now as to whether I can leave the gas...

Can I shut off water supply to leaking hot water tank? [ 1 Answers ]

Can I shut off water supply to leaking hot water tank?

Cold water tank full of hot water [ 3 Answers ]

All the cold taps upstairs and the toilet are now running hot. Cold water tank in the loft is full of hot water! Help!

New hot water tank installed, loss of water pressure [ 1 Answers ]

After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you.


View more questions Search