Ask Experts Questions for FREE Help !
Ask
    ababs44's Avatar
    ababs44 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2007, 02:24 PM
    Replacing thermostat
    I'm trying to replace an old honeywell thermostat attached to a Tiranco Heatmaker with a new programmable thermostat, RITETEMP. I have only two wires which are not labeled(one black one white). The new thermostat has all kinds of wire ports with different letters

    If anyone knows how to attach which wires to attach where please let me know

    THANKS!
    -drew
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 25, 2007, 03:23 PM
    What model of t-stat is it? If its digital and doesn't run on batteries you need to add a wire or get a different t-stat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Lennox Thermostat with Honeywell Thermostat [ 2 Answers ]

I have a Lennox T90H110A137 Thermostat with the following terminal letters and wire colors: G - blue wire F - red wire C - green wire H - yellow wire V - white wire I want to install a Honeywell RTH6300B Thermostat. According to the RTH6300B Installation guide, it tells me to ignore wire...

Replacing Analog Thermostat with Non-Programmable Digital Thermostat [ 1 Answers ]

Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!

Replacing thermostat [ 22 Answers ]

Hello all experts: I recenty bought a new Honeywell thermostat to replace my old GE thermostat. How do I connect the wires? My heating system is using heatpump with multistage. Thanks a bunch! Ben

Replacing Janitrol Thermostat with Honeywell Thermostat [ 1 Answers ]

I am attempting to replace my manual Janitrol Model HPT 18-60 thermostat with a Honeywell Programmable Model CT3500 thermostat. My Heat Pump is a Trane TWR012-042C The 6 wires connected to the Janitrol thermostate are: Y, W2, G, R, O, C How do I connect these six wires to the Honeywell that...

Replacing old thermostat [ 6 Answers ]

I bought a new thermostat (digital 7 day programable) for the main part of the house, and I was going to move the old digital to the "gas fire place heated room". My problem... there are only 2 wires coming out of the wall going to the gas fire place. The old one had 3 from the wall and the RC...

View more questions Search