Ask Experts Questions for FREE Help !
Ask
    jaxallen's Avatar
    jaxallen Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 25, 2007, 10:46 AM
    Gas wall heater ingnition switch guide?
    I can't remember which combination of switches needed to start my wall mounted gas heater.
    Rotary knob marked 1-6 with spark /flame symbol
    Upper button with spark symbol - think this is igniter?
    2 buttons -1st round dot; 2nd flame symbol.
    These 2 buttons are linked...
    Does anyone know the settings to get this heater to light? New tank of gas and tank is on.
    I can see no pilot light as yet. Thanks:confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Nov 25, 2007, 01:56 PM
    Model number?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas wall heater will not light [ 3 Answers ]

Hi, I have a William Monterey Gas top vent wall heater. I cannot get the pilot to light. I replaced the thermocouple and this did not fix the problem. The gas is coming through as I can both hear it and when I hold the pilot button down it will stay lit (till I take my finger off even after...

Coleman Model 69 Wall Gas Heater [ 1 Answers ]

I just bought a house that has one of these in the garage. I can get the pilot light to go== But as soon as I go to put it to on it goes out? It also has a little gas lever that I have fooled around with but it just doesn't want to go into a pilot light stay lit mode. HELP!!

Coleman Gas Wall Heater won't fire [ 1 Answers ]

We have an older gas wall heater that the thermostat has never really worked... basically "on" or "off". It hasn't been a problem because we don't use the room much. It was working this past winter. We are now selling our house and the inspector said it would not fire. The pilot light is on. ...

Gas wall heater problem [ 2 Answers ]

I have a problem with my gas wall heater when the tenant moved out. The heater will not turn on when I turn the thermostat to a higher temperature level, so I check to see if the pilot light was lit, it was. Then I touch the 2 wires together from the thermostat to the heater, no ignition. What...

Gas Wall Mount heater [ 1 Answers ]

I have a Williams wall mount heater model #5009622. My problem is I do not know if it wired up correctly. I looked at an owners manual online and it showed a diagram of a control valve having three electrical posts. Mine has four. What I need to know is where all the components connect to the...


View more questions Search