Ask Experts Questions for FREE Help !
Ask
    Danny1's Avatar
    Danny1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2007, 06:28 PM
    Comfortmaker gas furnace will not ignite.
    My furnace was working yesterday and we did not turn it off, but it will not function today. I know there is electrical power at the unit; that there is gas supply; the filter is new; the inducer motor comes on when the thermostat is adjusted;but no flame appears. The inducer motor will remain running until I shut it off. Thank you.
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
    		  
    #2

    Nov 23, 2007, 08:02 PM
    Sounds like your hot surface iginitor is shot and needs to be replaced
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Nov 23, 2007, 09:40 PM
    Could be the pressure switch too. For a better understanding of your furnace, check the sticky at https://www.askmehelpdesk.com/heatin...ons-58313.html
    Danny1's Avatar
    Danny1 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Nov 25, 2007, 12:14 PM
    Quote Originally Posted by Danny1
    My furnace was working yesterday and we did not turn it off, but it will not function today. I know there is electrical power at the unit; that there is gas supply; the filter is new; the inducer motor comes on when the thermostat is adjusted;but no flame appears. The inducer motor will remain running until I shut it off. Thank you.
    This is Danny. Thanks for the responses. It turned out that the Thermostat was faulty. I replaced it and I am cozy and warm. Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Comfortmaker Furnace Help [ 4 Answers ]

My Comfortmaker Furance (GUG070A012N) will not always kick-in at the set temp level. The Thermostat is verified operational and good. Most times the heat will kick in, but the fan blower will not run. If I remove the panel and spin the fan manually, sometimes this will engage the fan and the...

Gas furnace won't ignite sometimes [ 5 Answers ]

Hi I have a 15 yr old carrier weathermaker gas forced air furnace model 58sxa080 the furnace works fine most of the time although every so often usually in the mourning and sometimes during the day ( after the thermostat sets itself back to 65 overnight) when the thermostat calls for the...

Comfortmaker Furnace [ 2 Answers ]

I recently purchased a new Comfortmaker Furnace, the problems is it runs for approx. 4-1/2 minutes, shuts off and then comes back on in 2 minutes. I have had a couple of people check and they said that nothing is wrong with it. Any suggestions on what the problem might be?

Comfortmaker furnace shuts down [ 1 Answers ]

I have a comfortmaker furnace that is vented with a 3" duct and a blower. Recently it started where the furnace will run through it's course , the glow plug will work, then the gas valve opens and you can see the heat in the exchange and then after a few minutes the blower will come on and heat...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search