Ask Experts Questions for FREE Help !
Ask
    keithevola's Avatar
    keithevola Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2007, 05:30 PM
    Wiring a Hunter ceiling fan with light
    I am having trouble wiring a Hunter ceiling fan with light.

    In the ceiling, I have a black, white, bronze and red.

    In the fan I have two greens, white, black and a black/grey wire.

    Which go with which? Thanks. K
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Nov 23, 2007, 06:02 PM
    Couldn't say for sure, but white to white is for sure, the 2 greens will go with the "bronze? If that is a bare wire. On the fan, Black is Fan, and Black/gray or white is light.
    Black and red could be switch legs from switches on wall (1 or 2)? If black is hot all the time. Maybe hook black(fan) so it will work with pull switch, and connect red to black/gray so light can be switched from wall.
    keithevola's Avatar
    keithevola Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 23, 2007, 06:35 PM
    I will try it and let you know.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Nov 24, 2007, 12:08 AM
    Black to black, white to white, striped to red, greens to bronze.

    Ceiling fan wiring - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help with wiring a HUNTER Ceiling Fan and Light Control [ 16 Answers ]

I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...

Hunter ceiling fan wiring [ 1 Answers ]

I need help with wiring a hunter baseball fan light switch. The old switch broke and I have a new one. There are only two wires coming from it(black and black w/with stripe). I have tried to connect with others but is not working, any help please thanks

Wiring issue with a Hunter Ceiling fan [ 2 Answers ]

Thanks in advance for anyone who can help me. I just moved into a brand new home and the Master Bedroom is pre-wired for a ceiling fan. It has two wall switches, one to control the light and one for the fan. The Hunter fan has a black, a white, a black/white and two green wires. The prewire...

HELP! Wiring a pull chain in a Hunter ceiling fan [ 3 Answers ]

Ok, my 81 year old mother's ceiling fan pull chain broke off inside the switch. I was careful when I changed the switches, only changing one color at a time. It didn't work, so I called my electrician brother-in-law who discombooberated the whole mess, told me the switch I got was bad and went on...

Hunter Ceiling Fan Light Installation [ 1 Answers ]

I bought a house with a Hunter ceiling fan with remote (no light). I went to the store and purchased a light to go with it. The instructions on the light say that I have to dismantle the entire remote system by unplugging it, but I don't see where I can do this. There are 2 black boxes with wires...

View more questions Search