Ask Experts Questions for FREE Help !
Ask
    curtrobi's Avatar
    curtrobi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2007, 08:50 AM
    Having trouble lighting furnace
    Can't find where to light the furnace on an old carrier.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #2

    Nov 23, 2007, 09:03 AM
    If your furnace has to be lit manually then it will have a knob on the gas control valve to depress in the pilot position hold down, lite pilot, continue to hold down for one minute, turn knob to on position. The pilot is in the burner section and will have a 1/4" aluminum tubing attached to it coming from the gas control valve. Good luck, Mike
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

Lighting gas water heater and furnace [ 2 Answers ]

Last summer we shut off the furnace pilot light by turning the valve to off. When we tried to relight the older carrier furnace we could not. Someone turned the valve of to the water heater. Now we can not light either.

Main burners on my carrier furnace not lighting [ 1 Answers ]

I have a carrier natural gas furnace, model no. 58es080-30. The pilot light ignites, then you can hear a clicking noise, after about 15-20 seconds the blower fan starts up but the main burners are not lit. The furnace has acted like it's been having trouble igniting in the past few weeks, seems...

Furnace trouble [ 5 Answers ]

Our furnace will work for about 2-3 hours fine, then it will act up, it will click on but the Fan will not turn on to get furnace working, it sits there clicking and clicking, we then have To turn off for about one hour.. then turn it on again , this time it works for another 3-4 Hours or 5-6...

View more questions Search