[cessna182]

I have a 6 year old Amana CCA30 furnace. The blower motor stopped turning and emitted a 60 hertz hum. I replaced the capacitor and it worked for about 3-4 heating cycles the stopped again producing the same hum. I can turn the squirrel cage by hand pretty easily with no power but it will not turn with power applied. Is this a locked rotor condition requiring a motor replacement too?

[dottie9999]

I have a 6 year old Amana CCA30 furnace. The blower motor stopped turning and emitted a 60 hertz hum. I replaced the capacitor and it worked for about 3-4 heating cycles the stopped again producing the same hum. I can turn the squirrel cage by hand pretty easily with no power but it will not turn with power applied. Is this a locked rotor condition requiring a motor replacement too?

I had to replace the blower motor on my Coleman dualpack purchased 07/04. It was clogged with dust. Problem 1st stage motor would come on & just stay in the 1st stage. Repair person came out and the above was the results of the trip call.

[hvac1000]

The motor is toast. Replace both the motor and also get a new capacitor that matches the new motors requirements.