Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange
[ 1 Answers ]
We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange
Toilet flange
[ 3 Answers ]
Hi, I'm putting a new floor in the bathroom. The tolet flange is higher by 1/4 in on one side and 1/2 in on the other above the floor I'm going to put ceramic tile down. Do I need to level it out or bring the floor up around the flange? Thanks Tim
Toilet flange HELP!
[ 3 Answers ]
HI, I need some good professional advise. My toilet was leaking and I removed it to find that the toilet flange was broken on one side. The flange and lower pipe appear to be cast iron 4 inch. I must replace some of the damaged flooring but am at a loss as to how to remove the cast iron flange from...
Toilet flange
[ 5 Answers ]
I am in the process of re-settin my toilet, It is located in the basement and the toilet flange sits on top of the ceramic tile. It is not flush with the tile. I have reset the toilet three times using various thickness of wax. These only last so long. I have purchased a wax free bowl gasket...
No toilet flange
[ 1 Answers ]
My 90 year old house has only a lead pipe coming about an inch out of the floor where the toilet was sitting, it is 4" diameter and it looks like the wax ring was placed right onto that without a flange. If I find a flange that fits, no luck so far, how do I attach it to the floor? Please explain... View more questions Search
|