Ask Experts Questions for FREE Help !
Ask
    ericm1980's Avatar
    ericm1980 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 18, 2007, 05:31 AM
    Wiring my L5
    I have a mono block amp auot tec mm1400 class D1 amp,and I want to wire it to some L5,Two of them in a f150 pick up.The L5s are 4 ohm but the amp is a 1ohm what do I do??
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Nov 18, 2007, 07:28 AM
    If your amp can handle 2 ohms, then 2 4ohm speakers in parallel will result in 2 ohms.
    4 speakers in parallel will result in 1 ohm impedance. Your Amp and your ears will be happy, but your wallet won't.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol wiring to rth3100c wiring [ 1 Answers ]

I've taken off the cover and the wires are all OK but the black one where does it go to? My heater won't come on (well some times the AC come on with out me turning it on.)

Honeywell wiring different from old thermostat wiring [ 2 Answers ]

I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

Wiring [ 1 Answers ]

I need to install a Marley baseboard heater and double line break thermostat. The wiring diagram that came with the thermostat make no sense to me. It references line 1 and line 2. The wiring in the heater itself doesn't make sense to me either. Nothing indicates what is positive or negative. Do...

AC Wiring [ 1 Answers ]

I have an eletrical AC unit with a 28.2 amp compressor and 3.1 amp fan. The nameplate on the unit specifies minimum circuit breaker size of 39 amps and maximum time-delay fuse of 60 amps. Two questions: 1) what size breaker do I need for this unit in breaker box? And 2) what gauge wire do I run...

View more questions Search