Ask Experts Questions for FREE Help !
Ask
    jironfour's Avatar
    jironfour Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2007, 11:48 PM
    Goodman problems
    I have a goodman furnace I have replaced the flame sensor the heat exchanger was also replaced and still having the same problems it acts like to wants to start but will not start the blower will start but the flame sensor will not start up please help.
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
    		  
    #2

    Nov 15, 2007, 05:18 PM
    You need to see if you get power to the ignitor if not check all reset limit switches to see if there tripped also make sure your vent is not plugged if that's all OK you might need a new board in which case you might want to call your dealer before replacing as electrical parts are usually not returnable
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman Furnace [ 2 Answers ]

What does A three blink code on a Goodman 80 plus gas furnace mean

Goodman [ 2 Answers ]

I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks

3 yr old Goodman Gas Forced Air Furnace problems [ 10 Answers ]

If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the...

Goodman heating unit problems [ 11 Answers ]

Hello, I have a Goodman :( heating unit in the house that I moved into model GPM100-4. When the exhaust fan comes on to clear out the system before the unit will fire up. It makes a clicking sound. I have learned that it's trying to pull a vacuum from the exhaust fan to a safety switch. If I suck...

View more questions Search