Ask Experts Questions for FREE Help !
Ask
    davidl's Avatar
    davidl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2007, 03:45 PM
    No gas to gas furnace
    I can't get the gas to come on in my furnace.. Someone turned it off in the summer and I can't find a knob to turn it back on... The pilot light knob won't turn thre gas on... But I have gas in my cooking stove
    XenoSapien's Avatar
    XenoSapien Posts: 627, Reputation: 42
    Senior Member
    		  
    #2

    Nov 15, 2007, 04:25 PM
    There should be a valve lever somewhere to turn it back on. Follow the black pipes.

    XenoSapien
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Nov 15, 2007, 05:04 PM
    There should be a valve near the furnace. If its handle is going the same way as the gas line, the gas is on. Turn the pilot knob to pilot. You should then be able to push the red button down and light the pilot. For more details, see the directions for lighting a pilot light in the sticky at https://www.askmehelpdesk.com/heatin...ons-58313.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace [ 3 Answers ]

Gas furnace made roger white 505a-241 contaroller flash 3 times error code that means pressure switch stuck open. I don't know and where is the pressur switch. Please help. Thanks

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

Gas furnace [ 2 Answers ]

I have a brand new gas furnace. It works well for a few days after it is installed. But after a few days the induced draft blower start immediately after the blower off (even the thermostat is satisfied) and the induced draft blower keep on and off very frequently (1-2 times/second). The technician...

Gas furnace [ 2 Answers ]

A code comes up on my new installed gas furnace," incorrect line voltage phasing" Can anyone tell me what this means. Thank You.

Gas furnace [ 14 Answers ]

Igot a 1972 carrer furnace it catches fire at the spud part of burner I got 11.5 inch watter column preasure on line you can cut it off turn it back on and it burns good blaze looks good I need some comet on air ajustment or what might be causing this I have cleaned the burners , thanks.

View more questions Search