Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing black adhesive from floor before installing new vinyl tile
[ 6 Answers ]
I have a bathroom (at the church I belong to) that has a hard type of vinyl tile in it. A toilet has overflowed 2 times in the past and flooded the floor. As a result, a lot of the tile has come loose. I have the replacement VINYL tile, but need to know how to continue. Under the tile is black...
Tile leak from 3rd floor through 2nd floor ceiling (bath)
[ 5 Answers ]
Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...
Removing Old Vinyl Tile from Cement Floor
[ 4 Answers ]
What is the best way to remove old vinyl tile from a cement floor? The tile has been on the floor for approx. 25 years and is securely stuck to the cement. Thank you, Mary Hamilton
Vinyl flooring over cement floor
[ 2 Answers ]
I want to buy some cheap remnant vinyl to put over my cement basement floor where my laundry room is... I have found the 6'by 9' vinyl but I don't know what I need to use for and adhesive to put it over the current cement floor. Anyone who can help I would appreciate it. Thanks
Proper underlayment for vinyl floor starting at floor joists
[ 2 Answers ]
What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction... View more questions Search
|