Ask Experts Questions for FREE Help !
Ask
    Sue_2007's Avatar
    Sue_2007 Posts: 9, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2007, 12:03 PM
    Welder/receptical hookup
    I am hooking up a receptical for a lincoln canadian tire welder,there are three wires red, black and white where do they go on the receptical and which one is the ground? Sue
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 12, 2007, 02:13 PM
    Need to know the model number of the welder, a link to it would be helpful.

    Also need to know where these three wires you mention are from? The building, or the welder.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

220 Welder hookup [ 3 Answers ]

I am installing a 3 prong outlet for my welder, using 8-2 wire. The store gave me 8-3 wire and said to leave one wire out, so witch one do I leave out? I have red,black, white, and a bare ground. Thanks

Receptical outlets in a basement [ 1 Answers ]

I'm adding electrical outlets to my basement remodeling and would like to know if there is a code regulation with regards to the height from the floor that the receptacles need to be.

GFI receptical [ 1 Answers ]

I installed a one outlet gfi with a switch, it replaces an old two wire receptecal, the lightb switch works but the gfi will not reset, keep in mind it only has two wires coming from the power source, how do I hook up the two wires that are on the new recptecal along with the power source wires?

Receptical and switches [ 5 Answers ]

When purchasing recepticals and switches what price range should I be looking at. I have seen 10 packs at home depot for about $5. Im sure they are not the best choice only being about .50 a piece. I am using them for residential.

Roof receptical [ 3 Answers ]

I need to install a receptical under the eve of my roof for roof cable to plug into for melting ice on my roof. I would also like a pilot lite switch installed to let me know when the power is on for the roof cables. Do I need conduit from the inside of the house to the outside box. Any help in...

View more questions Search