| 
 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
 [ 11 Answers ]
 I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B - 
GFA Heat; Poor Heating in Apt - Heat is Trapped Near the Ceiling
 [ 6 Answers ]
 In a nutshell: The warm-air registers in my apt are at the very top of the ten foot high walls. Hot air does not circulate properly to heat my 1-bedroom apartment. Details: Based on what I know about the basics of energy, heat rises. And I can't for the life of me understand who thought... 
A/C working, switched to heat, now ac and heat don't work
 [ 1 Answers ]
 Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy 
Heat runs with ac and even auto kicks on emg heat
 [ 1 Answers ]
 (Coleman Evcon) Some how the hot and cold on the inside thermostat switched.how is that possible?and how do I fix it? 
Electric heat pump auxilery heat problem
 [ 4 Answers ]
 Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not.... View more questions Search 
 |