Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tile Shower stall leaking
[ 5 Answers ]
I installed a shower stall a year ago. It has begun to leak. It is on the second floor, and I was able to open the ceiling just below it to see. The water is leaking from around the drain itself. The shower stall pan was installed with a poly sheet.. according to the directions... so that...
Shower tile replacement
[ 1 Answers ]
Hi, My wife wants me to replace the ceramic tile in our walk in shower. It has white grout that she has a hard time keeping clean, plus she dosen't like the tile. The shower walls are the standard cultured marble type. Its on a slab and does not leak. My question is can I just take out the old tile...
Custom Tile Shower?
[ 5 Answers ]
I am planning on putting a custom shower in my basement and was not sure on how to handle the floor. The plumbing is roughed in but inside the shower is just a flat concrete floor ( the floor was cut to add the drain.) I feel I need to add some slop to the drain. I heard of a dry mortor bed but...
Installing new tile on top of shower pan
[ 2 Answers ]
I am going to be installing tile over durock cement board which sits on the top edge of my shower pan and just slightly over hangs into shower pan. Should I rest the starter row of tiles down on the cultured marble shower pan which has a 1/2 in lip or should I leave maybe 1/8 gap and if so what do...
Going from tile to insert in basement Shower
[ 3 Answers ]
The shower stall is 30 deep by 31 wide and the drain is not in the middle of the stall. There is a couple of inched difference between the bathroom floor and the shower floor. I assume there is some kind of base that will need to come out when I tear the tile out. Does anyone make a muti-piece... View more questions Search
|