Ask Experts Questions for FREE Help !
Ask
    mfdii's Avatar
    mfdii Posts: 4, Reputation: 1
    New Member
     
    #1

    Nov 6, 2007, 06:48 PM
    Adding a Shower Drain in Basement
    I looked through the previous posts, but unfortunately nothing seemed to fit my situation.

    My wife and I recently bought a house and there is "rough in" for a half bathroom in the basement. We plan on finishing the basement and the wife wants a shower in the new bathroom. I really want to avoid any concrete work to install a shower drain and I wouldn't mind raising the shower 6" if need be. The ceilings are tall (8 1/2' to the joists). Attached are pictures of the existing basement plumbing. The main drain runs parallel to the wall with the sink drain and both the toilet and sink are vented (the vent runs into the corner and up).






    We would want to put the shower next to the sink (essentially on the far right of the second photo.)

    Thanks for your help.
    Michael
    plumberjames83's Avatar
    plumberjames83 Posts: 99, Reputation: 5
    Junior Member
     
    #2

    Nov 6, 2007, 07:54 PM
    You would need to raise it more then 6" but it can be done. cut it in on the pipe to the right add in a san tee and a 2" p- trap and you are done make sure you have a 1/4" /ft. fall and you are good if you need more just ask
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #3

    Nov 7, 2007, 07:15 AM
    Quote Originally Posted by plumberjames83
    you would need to raise it more then 6" but it can be done. cut it in on the pipe to the right add in a san tee and a 2" p- trap and you are done make sure you have a 1/4" /ft. fall and you are good if you need more just ask
    Given how the Water Closet is vented separately, the poster likely lives in an area where wet venting isn't allowed, which means he will need to vent the new shower as well if he wants to stay within code.
    mfdii's Avatar
    mfdii Posts: 4, Reputation: 1
    New Member
     
    #4

    Nov 7, 2007, 07:53 AM
    Ohio allows wet vents. I am checking with the local plumbing inspector, but according to their website they use the Ohio Plumbing Code.

    If 6" isn't enough, how much clearance are we talking about?
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #5

    Nov 7, 2007, 08:11 AM
    Quote Originally Posted by mfdii
    Ohio allows wet vents. I am checking with the local plumbing inspector, but according to their website they use the Ohio Plumbing Code.
    Curious -- Will it still be considered a legal 'wet vent' if your sanitary tee for the new shower is below the 2" wye servicing the drain pipe coming down to the right of the lavatory rough-in?
    plumberjames83's Avatar
    plumberjames83 Posts: 99, Reputation: 5
    Junior Member
     
    #6

    Nov 7, 2007, 03:00 PM
    Quote Originally Posted by iamgrowler
    Curious -- Will it still be considered a legal 'wet vent' if your sanitary tee for the new shower is below the 2" wye servicing the drain pipe coming down to the right of the lavatory rough-in?

    Relly there need to be a cleanout under the wye. "at the base of every stack there shall be a cleanout" but yes he could put it below the wye
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #7

    Nov 7, 2007, 06:34 PM
    Quote Originally Posted by plumberjames83
    relly there need to be a cleanout under the wye. "at the base of every stack there shall be a cleanout" but yes he could put it below the wye
    I'm not trying to be obtuse here, but doesn't that pretty much fly in the face of the rationale given for why wet venting is acceptable in some instances but not acceptable in others?
    plumberjames83's Avatar
    plumberjames83 Posts: 99, Reputation: 5
    Junior Member
     
    #8

    Nov 8, 2007, 07:07 PM
    Not sure what you are getting at maybe I am a little slow but if you were doing this to pass inspection you would need a cleanout at the bottom of the stack to pass
    And then put the san tee on the far right pipe above the wye
    For this guys particular situation if not getting inspected he could put the san tee below the wye if he can work his fittings to stay out of the cabinet..

    Is that what you were trying to ask sorry if I wasn't clear on that last one

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing Basement Shower Drain with Washing Machine Drain [ 5 Answers ]

Hi folks: I would like to install a shower that drains into the same drain as my washing machine. Right now the washing machine drain, 1-1/2" ABS, comes in horizontally about 12" above the concrete floor into a 1-1/2" Tee on a vertical pipe. From this Tee, the vent goes straight up to the...

Adding shower and toilet in basement [ 1 Answers ]

I am installing a toilet and a shower stall in the basement need to put drain lines in. Need step by step instruct. Doing it myself.

Shower in Basement -drain [ 1 Answers ]

I am replacing a shower enclosure that was taken out of my basement years ago. The problem is that there is no shower drain in the cement floor. The previus shower was drained to a flexible rubber tube that flowed under the shower to the floor drain in the laundry room. I purchased some rubber...

Shower drain in basement [ 8 Answers ]

I bought a one-piece Lasco shower enclosure as part of finishing the basement bathroom. The PVC drain is plumbed in and sticks up about 6" out of the floor. There is also a large diameter black corrugated "hose" around it (I guess for when they poured the concrete floor around it.) I can cut this...

Basement shower drain [ 3 Answers ]

I have a basement shower drain which is cast iron embedded in concrete. Since the top of the drain was cut off at the top of the concrete, I have been chipping away at the concrete around the drain to use an Oakley adapter which fits around the outside of the pipe. The adapter then uses a key to...


View more questions Search