 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool dryer wiring timer
We thought we knew with wiring schematics of our timer on our dryer, but not that we are trying to put it back on, we have two wire left not attached to anything. The blue wire coming of the temperature control and the white wire coming off the finishing guard. I really don't know where they could possibly hook up. If anyone could help, I sure do thank you.
|
||||
|
||||
|
Kchammack- Most dryiers have a wireing SCHEMATICS , on the back panel ,on the outside, look there and look for one wire color at a time , find the color and follow it to see where it goes, then go to next color> Or check with a appliance repairman. Good Luck F.B.E.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a whirlpool dryer that just stopped working. I set the timer and press start. I can hear the timer working, but the drum does not engage. If it was a bad door sensor, would that still let the timer operate? Not sure what to do. I do not have a volt meter. Any help?
When we turn on the dryer, it stops after a few minutes. Sometimes I push start and it doesn't turn on at all. Sometimes it turns on and stops after five minutes. Sometimes fifteen minutes so there is no consistency but the heat is fine. When it does turn off the timer points to zero. I will...
Can anyone help? I have a Whirlpool dryer and it stops spinning but the timer keeps running. If you press the start button again, it will start back up. Any suggestions? Model# LER4634EQ2 approx 7 years old. Thanks!
My Whirlpool gas dryer is having a problem where it won't stop drying without manually shutting it off our opening the dryer door. The timer stays at the same place where it started and does not progress. The sensor timer does not work either, stays still. They dryer will literally run for hours...
View more questions Search
|
