Ask Experts Questions for FREE Help !
Ask
    STONECOTTO's Avatar
    STONECOTTO Posts: 25, Reputation: 1
    New Member
     
    #1

    Nov 2, 2007, 06:15 AM
    Pvc to copper
    Hello, am doing kitchen remodel and am moving my sink my drain is 1 1/2 can I use pvc to hook up the new my drain to it.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 2, 2007, 06:52 AM
    Your post is confusing, Drains aren't typically copper. There are rigid and flexible rubber couplings to go from 1.5" pipe to PVC.

    There are also fitting to go from copper to PVC/CPVC for the water supply.
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
     
    #3

    Nov 2, 2007, 07:05 AM
    They make pvc Fittings for your job and you can hook PVC tail stock on sink

    Then a PVC P trap and Then connect to the 1 1/2" PVC drain line...

    I really like working with PVC -- Best thing since sliced bread!!

    PVC can be used to plumb water lines -- flex lines to faucet

    Please rate my answer -- Good Luck on your project
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Nov 2, 2007, 07:14 AM
    Quote Originally Posted by STONECOTTO
    hello, am doing kitchen remodel and am moving my sink my drain is 1 1/2 can i use pvc to hook up the new my drain to it.
    Yes, you may use PVC. However, you must first convert to PVC. You will need to solder on a 1 1/2" copper male threaded adapter on the copper stubout and convert to PVC with a PVC 1 1/2" female threaded adapter. From there it's PVC all the way. Cheers, Tom
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #5

    Nov 2, 2007, 11:15 AM
    How extensive of a job is this? Where is the transition going to be? If it is inside the wall, I think you have no choice but to solder as Tom said. If you are still going into the wall in the same place, it may have a threaded copper joint already. My house is plumbed up with copper drain pipes, but under the sinks, I have chrome plated brass with compression fittings. If you are still going into the wall in the same place, you may be able to run all PVC from there to the sink.

    Wait for Tom or iamgrowler to confirm it, but I don't think the rubber couplings are allowed to go inside the wall.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #6

    Nov 2, 2007, 12:57 PM
    I don't think the rubber couplings are allowed to go inside the wall.
    Tru-dat! Rubber couplings and compression fittings are not allowed in the walls. Does any body know if Sharkbite fittings are allowed?
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #7

    Nov 3, 2007, 04:21 AM
    Quote Originally Posted by speedball1
    Tru-dat! Rubber couplings and compression fittings are not allowed in the walls. Does any body know if Sharkbite fittings are allowed?
    A shielded coupling like a CK-115, which is designed to transition from 1-1/2" steel, plastic or cast iron to 1-1/2" copper DWV can be used inside the wall for drainage piping.

    As for the water piping, yes, Sharkbite fittings are permitted for concealed locations.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Copper to pvc conversion [ 1 Answers ]

How to connect pvc to copper?

Copper to pvc pipe [ 7 Answers ]

We are trying to install a water system in our home and need to know how we go from copper pipe to pvc pipe.

Copper v PVC [ 3 Answers ]

I'm in the process of building a home and the builder suggested we use PVC in stead of copper pipe. I understand there is a significant cost difference due to rising copper prices. The savings would be great, but I also don't want to sacrifice quality. I am interested to learn the pros and...

Copper to PVC [ 2 Answers ]

My house has all copper pipes. However, I noticed that from the street main before the house there is a tee that connects copper to PVC. The PVC branch is connected to my sprinklers and nothing else. I am worried that the PVC wasn't meant to be under constant water pressure from the main and...

Copper to PVC [ 1 Answers ]

HI (Ken) (!st time user) I am replacing the Main copper on/off valve. How do I connect a one inch copper outside main water pipe to a one inch PVC pipe, (which is connected to meter side) ? Additional info have 6 inches of copper and 6 inches of PVC above ground. I do not want...


View more questions Search