Ask Experts Questions for FREE Help !
Ask
    pat2468's Avatar
    pat2468 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2007, 12:56 PM
    Kenmore 17032 Dishwasher water activation
    My dishes in my Kenmore washer (2 months past warranty) are not getting clean because although water is in the dishwasher, it is not being circulated with the required force--on either level. Do I need to clean filters? If so, where are they? I have no manual!

    Pat
    J Costa's Avatar
    J Costa Posts: 88, Reputation: 9
    Junior Member
    		  
    #2

    Oct 29, 2007, 05:21 PM
    You can go to the kenmore website and get the manual, just have the model
    # ready.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water on top rack of Kenmore dishwasher [ 2 Answers ]

I have a 3 yr old Kenmore dishwasher that is not spraying any water on the top rack. I have already disassembled the upper wash and rinse parts and verified they were not plugged up. Is there anything else I can check before calling in the repairman?

Water supply for a kenmore dishwasher [ 1 Answers ]

I purchased a new Kenmore dishwasher, (Consumer Report # 1 rated if that helps). I do not have the model number handy, however, does it normally require a hot or cold water supply? Thanks in advance

Water supply for a kenmore dishwasher [ 2 Answers ]

I purchased a new Kenmore dishwasher, (Consumer Report # 1 rated if that helps). I do not have the model number handy, however, does it normally require a hot or cold water supply? Thanks in advance

Kenmore Built-in 363 Dishwasher with Standing Water [ 1 Answers ]

Hi, We have a Kenmore 363 Built-in Dishwasher. The dishwasher is not draining all of the way - there is a puddle of standing water (at least a cup) under the cover inlet. We only use the dishwasher once a week or so, and the standing water is growing into something rather unpleasant. We...

Kenmore dishwasher won't heat water [ 3 Answers ]

I have a new Kenmore Elite dishwasher. I have checked the water during the Hi Temp wash cycle and the sani rinse cycle and it isn't any hotter than 133 degrees, the temp of the water from my water heater. The instructions say the water should be at a minimum of 129 from the tap and I always run the...

View more questions Search